-40%
PROX PISTON KIT SUZUKI RM250 RM '82-85 OVERSIZE +.030

PROX PISTON KIT SUZUKI RM250 RM '82-85 OVERSIZE +.030" .75mm FITS 70.75MM BORE

$ 36.93

Availability: 100 in stock
  • Return shipping will be paid by: Seller
  • Country/Region of Manufacture: Japan
  • Item must be returned within: 30 Days
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Returns Accepted: Returns Accepted
  • Brand: Pro-X
  • Condition: New
  • Restocking Fee: 15%
  • Manufacturer Part Number: 2789

    Description

    READ THIS BEFORE PURCHASING :
    BUYER TIPS ON PURCHASING THE CORRECT PISTON SIZE.
    To determine which piston size you require there is a very important first step.
    Always measure your cylinder bore size first. This is only size that matters!
    Two-Stroke pistons are listed by size to FIT the cylinder bore size. Measuring pistons to determine what to purchase will most likely cause you to purchase an incorrect piston to fit the cylinder bore.
    Two-Stroke pistons are manufactured with a cam shape. They are never straight and round. Measure a 2-stroke piston at the bottom of the piston skirt, ninety degrees from the wrist pin hole. This measurement only is used determine piston to bore clearance. Do not try to match a size from a used piston. This will always produce a faulty measurement. Used pistons wear out and change shape.
    Buyer Tip: Before purchasing, remove your cylinder to be inspected and measure for bore size. If boring is required for your cylinder, purchase a piston at least two sizes larger than the measured size to allow clean-up and honing to the new piston size.
    This is a new PRO-X Piston Kit. Oversize +.030" (.75mm) Fits 70.75mm bore size. New piston kit, old stock.
    Fits: SUZUKI RM-250 1982-85,  2-Stroke.
    A qualified machine shop is required to measure your cylinder, then bore the cylinder to fit the piston.
    Check your bore size before purchasing.
    Year and Model are important, check yours before purchasing. Re-stock fee applies to returns for refund. No re-stock fees for exchanges.
    Here is a list of more piston sizes available to purchase on my store
    :
    1st oversize bore +.010" 70.25mm
    2nd oversize bore +.020" 70.50mm
    3rd oversize bore +.030" 70.75mm
    5th oversize bore +.050" 71.25mm
    6th oversize bore +.060" 71.50mm
    7th oversize bore +.070" 71.75mm
    8th oversize bore +.080" 72.00mm
    The kit is supplied with piston, single ring and clips and pin.
    Keep your vintage RM-250 running with this piston kit.
    You will receive 1 each piston kit when you order.
    Note : Picture is
    not
    exact model, you will receive correct kit when ordering.