Complete Solar Generator Cabinet with 2x SMA Sunny Island 6048 Inverters, Charge

Description

Complete inverter system pre-wired, ready to install. These cabinets have the inverters, charge controller and all distribution boxes installed, mounted and wired in a weatherproof cabinet. You will not find a system easier to install. It is as simple as plugging a solar array into the existing plugs, a battery bank into the existing Anderson connector, an AC power source (grid/generator) into the twist lock connector and connecting a load to it. Everything is new with only test use, the inverters are still covered under warranty. Weatherproof Cabinet consists of:
2x SMA Sunny Island SI6048-US-10 Battery Inverter (Invereters were manufactured between (1/2016 and 9/2017)
(SMA has remainder or 10 year warranty through manufacturer)
Midnite Solar Midnite Classic 250 Charge Controller
Midnite Solar Photovoltaic Combiner Low Voltage Breakers/Distribution w/ 2 -15 amp breakers and 1 - 63 amp breaker AC Load Center with 2x 50 Amp Circuits and 4x 20 Amp circuits
2x thermostatically controlled fans inside the cabinet 2x Hubbell 50 Amp Twist Lock for power distribution (CS6369)
SB350 Anderson Plug for connecting battery bank
SB350 Anderson Plug for auxilliary connection
Twist lock connector for grid/generator power input (CS6375)
Plug in connectors for solar array
DC Shunt to measure battery current (
Deltec 500 amp 50 mv MKB C shunt)
All battery wiring is 2/0 stranded copper
All other wiring is 6 AWG stranded copper except for 120 volt outlets which are 12 awg stranded copper
Dimensions
The main cabinet is 73" wide, 15" deep, and 32" tall. On top of that the lifting rings stick up 4", the side vents stick out 2" on each side, the handles stick out 1.5", and the hanging bracket on the back sticks out 3". So total dimensions are" 76" wide, 36" tall, and 16" deep.
Palletized dimensions are 74" x 40" x 42" (L, W, H)
Weight is 530 lbs